vihtavuori n555 Options

He explained starting off loads for 2400 need to be safe with 410 but to look at pressures meticulously as maximums were approached and temps fall. I come across it strange that Alliant expresses an issue and afterwards endorses ways to proceed with applying it! I'm wondering the amount 'disclaimer' is while in the response?



Also, this will likely press the speed from the round to about 1360fps in the 30" barrel, whilst however preserve you less than max Performing pressures.

If you seeking to slow the shell all the way down to below 1300fps (why I do not know, as it just causes the pattern to incredibly hot location center), then 296/H110 will be the best powder, as it can have a rather cleaner melt away in its place.

Also, be sure you established the crimper as much as crimp to the depth of about a dime, and be sure to are only somewhat taper crimping the hulls.

Does any one have any further information on the details of chilly weather conditions problems encountered with Alliant 410? Are .410 shotshell loads Safe and sound if shot while in the bitter cold... as winters are for some of us? I for 1, wish to know whether it is the actual chemical composition of Alliant 410 or ignition difficulties that will cause a 'double tension spike' in time strain curve?

I think it is usually that ignition is significantly unreliable since it gets colder but didnt press for aspects at some time so cannot be absolutely sure. I have never played with it because this discussion as I listed it less than "Why trouble in the event the very same can be experienced from 2400 and we know how it behaves."




Winchester 296 and Hodgdon one hundred ten are the exact same powder with another label. You can find by just good with out ever weighing a shot demand or reaming a bushing; almost no person does both.

If this is your initially stop by, be sure you check out the FAQ by clicking the website link above. Maybe you have to sign-up before you can publish: click on the register url earlier mentioned to progress.

In this post, we’ll investigate the Houses and programs of Accurate 1680 Powder, and why it’s a best option for discerning marksmen.

Alliant 410 - He claimed it has not been promoted being a magnum handgun powder for the reason that pressures climb as temperatures fall. He hinted that Lil'gun behaved like that as well but that Hodgdon had picked to launch handgun data for it.

Supposedly the burn up price is a little more quickly than 2400 but, If your maker isn't going to suggest it, I would not do it. I'm advised that Alliant 410 is also delicate to small browse around this site temps.

Your rammer tube can be set much too reduced. I have never loaded .410, but I believe that the 30 lb. you should move the indicator is too much to get a .410 wad. Try ramming a wad Together with the clamp loose and see Should the rammer tube moves up. If it does, check out a crimp. If which is as well high, reduced and champ the tube about 50 percent way.




Summary: Accurate 1680 Powder is usually a high-efficiency option for smaller caliber rifles and pistols, supplying dependable general performance and accuracy for discerning marksmen.

Hazmat Info: Chances are you'll get approximately forty eight lbs of smokeless powder in almost any packaging blend and a blended order with primers never to exceed 70 lbs.  The DOT-imposed hazmat price for every box and regular shipping charges utilize. Ground Hazmat shipping surcharge will use to all visit this site right here orders containing powder or primers. Combine powder and primers for an improved benefit. Maximum shipment weights of 48 lbs powder; 70 lbs powder and primers mixed.

Leave a Reply

Your email address will not be published. Required fields are marked *